Projection Tv - Mitsubishi VS-5075 Owner's Manual

Projection TV + Mitsubishi products thai: have
A/V Network terminals
_>Important:
_>Important:
The A/V Network is a special system that Mitsubishi developed to
make it easier to operate your system with one remote control.
When the supplied cable is connected between two Mit..3ubishi
products with the A/V Network, you carl point the remote control at
one product and it will "pass" the command to the other.
equipment you will need
• one A/V network cable
(included with the TV).
procedure
O Connect one end of an A/V network ceble to the ACTIVE A/V
NETWORK terminal on the back of the TV.
O Connect the other end of this cable to the A/V NE_IViORK IN
terminal on the back of a Mitsubishi component that has an
A!V network terminal.
You can now point your component remote (such as a VCR
remote) directly at the television. The A/V cable will "pass" the
remote commands to the component.
You should make this connection in addition to one of the other
connections in this chapter, not instead of other connections.
Check the owner's guide of each A/V Network component for more
information.
Mitsubishi
component
Rear Panel
ProjectionTV Rear Terminals I
Basic Connections
43