Uhf And Vhf Antennas - Mitsubishi VS-5075 Owner's Manual

Projection TV + separate UHF and VHF antennas
equipment you will need
If UHF and VHF signals are brought into your home with two
separate antennas, you will need to combine the antennas to
connect them to the Projection TV. To do this you will need a
UHF/VHF combiner. (There are different combiners for different
kinds of leads. Check with your local elec':ronics store :Forthe kind
of combiner you need.)
Pictured to the right is a standard
combiner.
To connect separate UHF and VHF
antennas to your Projection TV:
O Connect the UHF and VHF antenna leads to the appropriate
terminals on the UHF/VtIF combiner.
O Press the combiner onto the ANT-A terminal on the
Projection TV.
VHF Antenna
(Channels 2-13)
n/l/
y//
-- Flat Twin Lead
UHF Antenna
(Channels 14-69)
\\\\'\\\_1 t
Flat Twin Leaq
300 Ohm to
75 Ohm
O Combiner
Back: Side
Projection TV
Rear Terminals
s-wD Eo,_._j
ITUll P I MONn'OR---_ _--_
CABLE LOOp E XT-SP(8.Q}
Basic Connections 31