Mitsubishi VS-5075 Owner's Manual page 50

using your remote control to operate your Mitsubishi
laserdlsc player
After you have set up your remote control for your laserdisc player,
you can use the remote to operate the player.
0 Use the select buttons across the top ot'the remote control to
choose the layer that you "set up" to operate your laserdisc
player: CABLE or VCR-B.
O Point the remote control at the laserdisc player and press the
desired buttons.
You can use the POWER, CHANNEL, nambers (0-9), DISPLAY,
MENU, CANCEL, STOP, PAUSE, REW, PLAY, INDEX, and FF
buttons to operate your laserdisc player.
using your remote control to operate :your Mitsubishi A/V
receiver
After you have set up your remote control for your A/V receiver, you
can use the remote to operate it.
_]} Use the select buttons across the top of the remote control to
choose the layer that you "set up" to operate your receiver:
TV or CABLE.
Point the remote control at the A/V receiver and press the
desired buttons.
If you are using a Mitsubishi HTS-100, you can use the POWER,
VOLUME, and MUTE buttons to operate the receiver.
If you are using a Mitsubishi HTS-300, you can use the POWER,
CHANNEL, INPUT, VOLUME, ENTER, :number (0-911, DISPLAY,
MENU, CANCEL, AUDIO, VIDEO, ADJUST, and MUTE buttons
to operate the receiver.
Getting Started 51