Mitsubishi VS-5075 Owner's Manual page 49

Using the remote control to operate VCRs, cable
boxes, and other components (cont.)
using your remote control to operate your VCR
After you have set up )tour remote control for your particular brand
of VCR, you can use the remote to operate your VCR.
O Use the select buttons across the top of the reraote control to
choose the layer that you "set up" to operate your VCR: VCR-A
or VCR-B.
O Point the remote control at the VCR and press the desired
buttons.
If you are using a Mitsubishi VCR: you will be able to use all of the
buttons on the remote control to operate your VCR except for MUTE.
VOLUME and the PIP function buttons, which will always operat_
the Projection TV itself.
If you are using anot:her brand of' VCR, you can use the POWER.
CHANNEL, REC, STOP, PAUSE, REW, PLAY, FF, and TVNCR
buttons to operate your VCR.
using your remote control to operate your cable box
After you have set up your remote control for your particular bran(
of cable box, you can use tile remol:e to operate your cable box.
Use the select buttons across the top of the remote control to
choose the layer that you "set up" to operate your cable box:
CABLE or VCR-B.
O Point the remote control at the cable box and press the desired
buttons.
You can use the PO_rER, CHANNEL, numbers (0-9), and ENTER
buttons to operate your cable box. If you are using an RCA DSS or
Prime Star converter, you may be able to use additional buttons.
50 Chapter 3: Operating Your Projection TV