In The Pip Image - Mitsubishi VS-5075 Owner's Manual

Changing the picture in the PIP image
When you first activate the PIP image, as described on the previous
page, you will probably see the same picture in the ,,3mall image as
you do on the main image. This is because both images have the
same "source" and the same channel. A "source" is any signal that
your TV is receiving through the antenna terminals or through the
input terminals.
If you want to see a different picture in the PIP imsge, you need to
change its channel or change its source.
The easiest way to see a different picture in the PIP image is to
change its channel.
O© © C)
changing the channel of the
PIP image
O Make sure the ,_our'ce of the
PIP image is Antenna-A or
.M:Ltenna-B.
:Press the PIP channel button
,:CHANNEL) oil the remote
control to change the channel of
the PIP image.
)Important: To change the channel of the main image, use the larger
CHANNEL button on l_he remote or the CHANNEL buttons on
the front panel.
94 Chapter 4: Using the Special Features