Mitsubishi VS-5075 Owner's Manual page 60

_Important:
_Important:
TheProjection TV_s clockwill notbeset. u ntil youtuneyour
Projection TVto a channel t hat is broadcasting t hetime via
Extended DataServices ( XDS). I f your'I_
r loses power, you will
need to tune to that channel again to reset your clock.
If you set "Daylight savings" to "On," your TV will adjust the clock
by one hour when daylight saviags begins and ends.
setting the clock yourself
[] SET THE CLOCK
_ utgmatic
setting : OFF
Day : Wednesday
Time : - -
Use these buttons on the remote:
_ ADJUST .
to select the nay
ENTER
to set the time
[] MENU to go back
• Use the ADJUST buttons to set
"Automatic settint_' to "Off."
Press ENTER.
• Use the ADJUST buttons to
se]ect the "Day." Press ENTER.
[] SET THE CLOCK
_ Autpmatic
setting : OFF
Day : Wednesday
Time : 9:00pm
Use these buttons on the remote:
5 eY&T,he t, m e
1-_ ENTER
to start the clock
[] MENU to go back
• Use the ADJUST buttons to set
th e "Time."
• After you have set the "Day"
and "Time," press the ENTER
button to start the clock.
The screen will retm-n to the "First
Time Setup" menu.
Important:
_Important:
You can clear the time by pressing the CANCEL button when
"Automatic setting" is selected.
If you are receiving a VCR signal on channel 3 or channel 4, auto-
matic setting may not work correctly.
Getting Started 61