Mitsubishi VS-5075 Owner's Manual page 82

Important:
Important:
[] SET SUPERQUICKVIEW
Ant. Channel Ant. Channel
ID Ant-A -*- [0_ ........
[] ........ [] ........
Use these buttons on the remote:
1_ DJUST to _ CANCEL to cancel
select an input
[] ENTER to enter _ MENU to go back
QV
O Use the ADJUST buttons to
select an antenna (/mt-A or
Ant-B). Press ENTER.
You caa clear the input by
pressing CANCEL.
[] SET SUPERQUICKVIEW
Ant. Channel Ant. Chanrlel
O AnI-A 001 _ ........
[]
[] ........ [] ........
Use these buttons on the remote:
[_ DJUST to _ CANCEL to cancel
select a channel
[] ENTER to enter [_ MENU to go back
O Use the ADJUST buttons,
CHANNEL buttons or number
buttons to add a channel to the
list; press ENTER. You can
clear a. channel by pressing the
CANCEL button.
O Repeat steps O, O, and O to
customize the Super Quick
View memory.
O Press the MENU button to exit
this n_.enu.
adding channels to the list with the remote control
O Use the channel controls or number buttons to tune the TV to
the channel you want to add to the list.
O
Press and hold the SQV button until the letters "SQV" appear
on-screen, under the channel number, indicating that the
channel has been added to Super Quick View memory. Release
the button.
If the Super Quick View memory is full, the letters "SQV" will flash
when you release the SQV button.
Once you've added a channel to the SQV memory, the letters "SQV"
appear under the channel number any time the channel number is
displayed, even if you tune to the channel in another manner.
Using the Advanced Features 83