Speakers - Mitsubishi VS-5075 Owner's Manual

_Warning:
(_)
video input terminals
Use these yellow terminals to receive the video signal from a
standard VCR or another component.
(_) audio input terminals
Use these red and white terminals to receive the audio signal
from a VCR or other equipment.
@-) Active A/V Network terminal
Use to connect Mitsubishi products that have A/V network
terminals.
®
center channel input terminal
If you are using a Dolby Pro Logic surround sound processor,
such as the Mitsubishi HTS-100, connect an audio cable to this
terminal to use the Projection TV's speskers as center channel
speakers (see page 41). If you make this connection, set the
Projection TY's "speaker':' function to "Internal Center Chan-
nel." See pages 70 - 71.
®
subwoofer out terminal
This terminal sends out signals desigaed to be played back by a
subwoofer. (A subwoofer is a speaker designed to reproduce
very low frequencies). See page 42 for more information.
@ audio tuner output terminals
Use these red and white terminals to transmit the tuner's
audio signal to a home theater receiw_r.
@_ audio monitor output terminals
Use these red and white terminals to transmit the TV's audio
signal to an audio amplifier.
@_ external speaker terminals
Use to connect external speakers. Only use speakers with a
nominal impedance of 8 ohms.
Never connect equipment other than speakers to the external
speaker terminals. Don't connect speakers 1:hat are already hooked
up to an amplifier.
Overview of the Back Panel 25