Mitsubishi VS-5075 Owner's Manual page 24

Overview of the Back Panel
®
@
Jr-_ ANT-A
CABLE LOOP
CONNECTION S INCLUDING
EXTERNAL AMPLIFIER.
EXT.,SP(8,'_)
I',IO'I'E:
TURN OFF THE 8E'[
EEFORE SWITCHING
5 P EA KERS.
I
I®
i
.-@
_>Important:
@
antenna terminals (ANT-A, CA;BLE LOOP OUT, ANT-B)
Use the ANT-A and ANT-B terminals to receiw_ a signal from
VHF/UHF antennas or your cable system. Use the CABLE
LOOP OUT terminal to send out the signal being received by
the ANT-A terminal.
®
®
video monitor output terminal.
Use this yellow terlninal to transmit the standard video from
the Projection TV to a VCR, Video Copy Processor, etc.
video tuner output terminal
Use this yellow terminal[ to transmit the tuner's video signal to
a Home Theater receiver.
(_) S-VIDEO input terminals
Use to receive an S-video cable from a VCR, laserdisc player, or
camcorder.
If you connect an S-video cable to INPUT-1 or INPUT-2, the video
input next to it cannot be used.
24 Chapter 2: Connecting Your Projecsion TV