Mitsubishi VS-5075 Owner's Manual page 20

6)
select buttons
Your remote control has four layers: the
TV layer, the VCR-A layer, the VCR-B
layer, and the CABLE layer. You can set
up each of these layers to operate a
different piece of equipment. Use the four
buttons across the top of the remote to
select the layer you want to set up or use.
When you press a button on the remote,
the lights above the select buttons will
indicate the layer you are using.
@ VCR buttons
Use these buttons to control most
Mitsubishi VCRs, or set up the remote to
use them to control other brands of VCRs.
The PLAY button is also used with the
Active A/V Network (see page 101).
_ power button (POWER)
Use to turn the Projection TV on or off.
When you turn the Projection TV on, the
power indicator will light in green.
(9 mute control (MUTE)
Use to turn the sound off completely or to
restore it to its original volume.
(5_ super quick view button (SQV)
Press to view channels you have
programmed into super quick view
memory.
@ quick view button (QV)
Press this button to instantly switch to the
channel that you designated as the "quick
view" channel. Press again to return to the
last channel viewed.
@ light button
Use to light up the remote (for 3 seconds).
@ volume control (VOLUME)
Press the top part of the button to turn up
the volume; press the bottom part of the
button to turn down the volume.
@ input button (INPUT)
Use to select the input source you wish to
watch:
• Antenna A,
• Antenna B, or
• Input 1, 2, or 3.
@ channel control (CHANNEL)
Press the top part of the button to change
to a channel with s higher number; press
the bottom part to change to a channel
with a lower number.
@ enter button (E1VFER / EXCIt)
Use this button after selecting a channel
number, after selecting an item from
the on-screen menu system, or with the
picture-in-picture :mode.
@ adjust buttons (._, V, 4, • )
After selecting an audio or video function,
use these buttons go adjust it. _dso use
these with the picture-in-picture mode and
to select items in the menus.
@ cancel button (C,ANCEL)
This button is used to cancel a ,channel
number, to clear a channel programmed
into super quick: view memory, and to clear
the settings of some on-screen menus.
@ menu button (MENU)
Use this button to display the on-screen
menu system, which contains additional
instructions for special functions.
@ display button (DISPLAY)
Use to view an on-screen summary of the
current settings; for the Projection TV or
cable functions and the display related to
Extended Data Services (XDS).
@ home button (HOME)
Press to return to regular TV _dewing
from the on-screen menus, to turn off the
on--screen displays, and to cancel the closed
captioning.
Overview of the Remote Control 19