Mitsubishi VS-5075 Owner's Manual page 100

Using the Active A/V Network Feature (cont.)
_Important:
_Important:
what the Active AN Network does
The Active A/V Network makes it _,a_ier and faster to use your
Mitsubishi VCR's Quick Program and Play commands, as described
below.
When using the Active: A/V Network, you should always point your
remote control at your Projection TV.
using the quick program button (QUICK PROGRAM)
When you press QUICK PROGRAM 1_o begin programming
your VCR:
Active A/V Network will turn on your VCR and bring it to the
"Program to Record" screen. (If the VCR's clock has not been
set, you will see the "Set, the clock" screen. See your VCR's
Owner's Guide for information about setting the clock.)
• Active A/V Network will turn oil your Projection TV (if it is off),
and switch the TV to INPUT-1.
You can program your VCR by pointing your remote control at
the TV.
When you press QUICK PROGRAM 1;oend programming
your VCR:
• If your TV has been set to "Active." Active A/V Network
will turn off your VCR (unless a tape is currently playing or
recording).
• Active A/V Network will return your Projectior.L TV to the
channel it was on before, or turn it off (if it was off originally).
After your Projection TV re_urns to its original setting, press the
TV select button at the top of your remote to be sure you are
operating the Projection TV.
102 Chapter 4: Using the Special Features