Mitsubishi VS-5075 Owner's Manual page 63

Adjusting the color alignment
Your Mitsubishi Projection _.FV has three picture tubes, which
are arranged in-line to project the light beams that create you
television picture. These three tubes must be aligned to creat_
best color picture. If the tubes are not aligned correctly, the o[
on your screen will have _halos" or discoloration around the e(
You should check the color Mignment when your Projection T_
first installed and any time you move your Projection TV.
The color alignment process has two parts: displaying the colc
ahgnment "test" screen and adjusting the alignment. You can
either the remote control ,0r the control panel buttons to perfo:
this procedure.
[] FIRST TIME SETUP
_ emorize Channels
Set the Clock
Add/Delete Channel
Set A]V Network
Align Colors
Use these buttons on the remote:
---1 ADJUST _)] ENTER _ MENU to
to select to enter go back
displaying the color alig_
"test" screen with the rein
control.
O Press the MENU button o
remote control. The Main
will appear on the screen.
O Use the ADJUST buttons
select "First Time Setup."
ENTER.
[] ALIGN COLORS
Use these butlons on the remote:
[] ENTER to select Red ()r Blue
"_ AI_/UST (Up/Do,m, LetgRight}
until the crosshairs appear white
MENU to go back
4-Red -;,
I'
¢
You will see the "First Tiv
Setup" screen. Use the AI:
buttons to select "Align co
Pres,_ ENTER.
You will see the "Align col
screen". :Press ENTER. T[
"test" screen (below left)
appear.
displaying the color align
"test" screen with the con
panel buttons
At the same time, press tt
ENTER button and the A]
JUST down button. (Thes
buttons are joined by a li_
marked "test.") The "test"
screen will appear.
64 Chapter 3: Operating Your Projection TV