Mitsubishi VS-5075 Owner's Manual page 26

t Basic Connections
l_Warning:
This section explains the basic connect:ions you will need to make
between your Projection TV, antennas, VCR, and audio compo-
nents. You will see there are different connections shown depend-
ing upon whether you have a cable box and the type of antenna you
are using. Choose the connections for the equipment you have.
This section explains:
• TV + external speakers,
• TV + antenna or cable without a cable box,
• TV + cable with a cable box,
• TV + separate UHF and VI-IF antennas,
• TV + VCR + antenna or cable without a
Projection
Projection
Projection
Projection
Projection
cable box,
Projection
Projection
Projection
Projection
terminal,
TV + VCR + cable with a cable box,
TV + home theater (A_V) receiver,,
TV + audio system,
TV + an amplifier witlh a center channel out
Projection TV + subwoofer,
Projection TV + Mitsubishi products that have AN
Network terminals.
You should unplug your :Projection TV and any other components
before connecting them.
Depending on you_ system, you may have to make connections
described in more than one of the sections above.
To complete the appropriate connections for your system, you may
need to purchase additional accessories, such as cables, adaptors,
or splitters. These accessories are sold by electronic.,, stores, your
Mitsubishi dealer, and many places that sell A!V equipment.
26
Chapter 2: Connecting Your Projection TV