Mitsubishi VS-5075 Owner's Manual page 22

_7]
a udio and video controls
Use these buttons to select the audio and
video functions you want to adjust.
Repeatedly press the AUDIO button or
VIDEO button to select one of the
functions listed below.
• audio function button (AUDIO)
- stereo/SAP/mono
- bass
- treble
- balance
- surround off/simulate/hall
- speaker internal/internal center
channel/external
- monitor out variable/fLxed
video function button (VIDEO)
- tint
- color
- contrast
- brightness
- sharpness
- color temperature high/middle/low
- closed captioning
_ quick program button
(QUICK PROGRAM)
Use this button to easily program your
Mitsubishi VCR. When you press this
button, your Projection TV will switch to
Input-l, your VCR will turn on, and the
VCR's "Program to record" menu will
appear. When you are finished program-
ruing, press this button again; your VCR
will turn off, and your Projection TV will
return to its previous position.
If you press this button while the TV lock
is on, or while using the Projection TV's
menus, then the VCR will turn on, but the
Projection TV will not switch inputs.
_> Important:
You must have connected a Mitsubishi
VCR to your TV with an A/V Network
cable to use this feature.
(_) number buttons (0-9)
Use to select a channel number or to enter
a parental lock code.
off-timer button (OFF-T)
Use to program 1;he Projection TV to turn
off automatically at a later time.
(_) picture-in-picture controls
Use to control the special picture-in-picture
(PIP) function. (See pages 92 - 100.)
• PIP button (PIP) -- Press to turn on
the reduced P:[P image, to change its
size, or to cancel it. The button is also
used with the Active A/V Network
Feature (see pa_:e 101).
• channel button (CHANNEL) -- Press
to change the channel of the reduced PIP
image.
• swap button (SWAP) -- Press to
exchange the sound between the main
image and the reduced PIP image.
• source button (SOURCE) -- Press
repeatedly to ,_witch the source of the
reduced PIP image between the TV and
the external inputs.
• pause button (PAUSE) -- Press to
freeze the reduced PIP image, to return
to a "live" image, and to use the
Snap-shot and Replay functions.
• enter button (ENTER / EXCH) --
Press to exchange the pictures of the PIP
image and the main image.
• adjust buttons (A, V,4, _ ) -- Press to
move the PIP image on-screen.
Overview of the Remote Control 21