Mounting The Phone To The Wall; Turning On The Phone; Using The Administration Web Server - Linksys 900 Series Administrator's Manual

Using the Administration Web Server

Mounting the Phone to the Wall

Note When mounting the phone to a wall, do not attach the desk stand.
Step 1
Attach two appropriate screws to the wall. Leave 1/4" distance from the wall. This allows you to slide
the mounting brackets on to the screws.
Step 2
Push down slightly to lock the phone in place.
You can purchase an optional wall mount kit (MB100) from your retailer or Linksys.com.

Turning on the Phone

If you are using an external power source, instead of Power over Ethernet (PoE), plug the
adapter to an electrical outlet. Use only the adapter supplied for the specific phone.
•
•
•
•
•
At the bottom of the LCD screen, redial, dir, cfwd, and dnd are displayed over their associated
soft buttons. A small arrow appears next to dnd indicating that more menus can be accessed
by pushing the right side of the navigation button.
If the phone does not display the appropriate screen, verify the installation and connectivity. If
these are correct, try unplugging the phone and plugging it back in again. If you still do not see
the display, refer to the
Using the Administration Web Server
This section describes how to use the administration web server to configure the 900 Series
phone. It includes the following topics:
•
•
Linksys 900 Series IP Phone Administrator Guide
2-12
The phone executes a boot-up sequence when the power source is connected.
During this sequence, the display first shows LINKSYS® or a customized message and then
"Initializing Network."
All of the lights on the phone flash.
After the sequence, which should take about five seconds, the phone displays the standard menu for
the phone.
The date, name, and number of the phone will display on the top line of the LCD screen.
"Troubleshooting FAQ" section on page
Connecting to the Administration Web Server, page 2-13
Administrator Account Privileges, page 2-13
Chapter 2 Getting Started
3-35.
Document Version 3.1