Linksys 900 Series IP Phones
•
•
Caring for Your Hardware
The Linksys 900 Series IP phones are electronic devices that should not be exposed to excessive heat,
sun, cold or water. To clean the equipment, use a slightly moistened paper or cloth towel. Do not spray
or pour cleaning solution directly onto the hardware unit.
SPA901
The SPA901 provides an entry-level IP phone that can be wall mounted (see
are the hardware features provided by the SPA901:
•
•
•
•
•
•
•
•
Figure 2-1
The following tables describe the status indicators and controls on the front of the device and the ports
on the back panel of the device.
Linksys IP Phone Administrator Guide
2-2
SPA942, page 2-7
SPA962, page 2-8
Voice Mail Message Waiting Indicator Light
Redial Button
Dedicated Flash Button
Volume Control Button Cycles Through Volume Levels. Controls Ringer and Handset Volume.
Standard 12-Button Dialing Pad
High Quality Handset and Cradle
Ethernet LAN – 10BaseT RJ-45
5-volt DC Universal (100-240 Volt) Switching Power Adaptor
SPA901
Chapter 2
Getting Started
Figure
2-1). The following
Firmware Version 5.1