Resync Url; Reboot Url; Provisioning - Linksys 900 Series Administrator's Manual

Chapter 2 Getting Started
If no protocol is specified, TFTP is assumed. If no server-name is specified, the host that
requests the URL is used as server-name.
If no port specified, the default port of the protocol is used. (69 for TFTP or 80 for HTTP)
The firmware-pathname is typically the file name of the binary located in a directory on the
TFTP or HTTP server. If no firmware-pathname is specified, /spa.bin is assumed, as in the
following example: http://192.168.2.217/admin/upgrade?tftp://192.168.2.251/spa.bin

Resync URL

The Resync URL lets you force the 900 Series phone to do a resync to a profile specified in the
URL, which can identify either a TFTP, HTTP, or HTTPS server.
Note The SPA resyncs only when it is idle.
The syntax of the Resync URL is as follows:
http://spa-ip-addr/admin/resync?[[protocol://][server-name[:port]]/profile-pathname]
If no parameter follows /resync?, the Profile Rule setting from the Provisioning page is used.
If no protocol is specified, TFTP is assumed. If no server-name is specified, the host that
requests the URL is used as server-name.
If no port is specified, the default port is used (69 for TFTP, 80 for HTTP, and 443 for HTTPS).
The profile-path is the path to the new profile with which to resync, for example:
http://192.168.2.217admin/resync?tftp://192.168.2.251/spaconf.cfg

Reboot URL

The Reboot URL lets you reboot the 900 Series phone.
The 900 Series phone reboots only when it is idle.
Note
The Reboot URL is http://spa-ip-addr/admin/reboot.

Provisioning

This section describes the provisioning functionality of the 900 Series phone. This section
includes the following topics:
•
•
For detailed information about provisioning the 900 Series phone, refer to the Linksys SPA
Provisioning Guide.
Document Version 3.1
Provisioning Capabilities, page 2-16
Configuration Profile, page 2-16
Linksys 900 Series IP Phone Administrator Guide
Provisioning
2-15