Line 1/2/3/4/5/6 Call 1/2 Status - Linksys SPA 900 Series Administration Manual

Info Tab
Field
Next Registration In
Message Waiting
Mapped SIP Port

Line 1/2/3/4/5/6 Call 1/2 Status

Field
Hazardous Potential
Foreign Voltage
Long Resistive Fault
REN
Call State
Tone
Encoder
Decoder
Type
Remote Hold
Callback
Peer Name
Peer Phone
Duration
Packets Sent
Packets Recv
Bytes Sent
Bytes Recv
Decode Latency
Jitter
Linksys IP Phone Administrator Guide
5-4
Description
Number of seconds before the next registration renewal.
Indicates whether you have new voicemail waiting: Yes or No. This is updated when
voicemail notification is received.
Port number of the SIP port mapped by NAT.
Description
The amount of hazardous potential is displayed.
The amount of foreign voltage is displayed.
The amount of long resistive fault is displayed.
The Ringer Equivalence Number (REN) is displayed.
Status of the call.
Type of tone used by the call.
Codec used for encoding.
Codec used for decoding.
Direction of the call.
Indicates whether the far end has placed the call on hold.
Indicates whether the call was triggered by a call back request.
Name of the internal phone.
Phone number of the internal phone.
Duration of the call.
Number of packets sent.
Number of packets received.
Number of bytes sent.
Number of bytes received.
Number of milliseconds for decoder latency.
Number of milliseconds for receiver jitter.
Chapter 5 Linksys IP Phone Field Reference
Firmware Version 5.1