Power Specifications For The Cisco Mds 9509 Director; Specifications For The Cisco Mds 9509 Power Supplies - Cisco AJ732A - MDS 9134 Fabric Switch Installation Manual

Appendix D Technical Specifications
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Table D-10
Module Type / Product Number
Cisco MDS 9513 chassis, DS-C9513, with front
(DS-13SLT-FAN-F) and rear (DS-13SLT-FAN-R) fan trays,
two Supervisor-2 (DS-X9530-SF2-K9), and two crossbar
modules (DS-13SLT-FAB1 or DS-13SLT-FAB2)
48-port 4-Gbps switching module, DS-X9148
24-port 4-Gbps switching module, DS-X9124
12-port 4-Gbps switching module, DS-X9112
4-Port 10-Gbps switching module, DS-X9704
48-port 8-Gbps switching module, DS-X9248-96K9
24-port 8-Gbps switching module, DS-X9224-96K
4/44-port 8-Gbps Host-Optimized switching module,
DS-X9248-48K9

Power Specifications for the Cisco MDS 9509 Director

This section includes the following topics:
•
•
•

Specifications for the Cisco MDS 9509 Power Supplies

The 3000-W AC power supply provides power based upon the input voltage, as follows:
•
•
The 2500-W AC power supply provides power based upon the input voltage, as follows:
•
•
If a 110-VAC input is chosen, a 110-VAC power cord (CAB-7513AC=) must be ordered separately.
Table D-11
Table D-11
Description
2500-W AC Power Supply
Type
Voltage
OL-17467-02
Typical AC Power Consumption for a Cisco MDS 9513 Director
Specifications for the Cisco MDS 9509 Power Supplies, page D-9
Component Power Requirements and Heat Dissipation for the Cisco MDS 9509 Director, page D-11
AC Power Consumption for the Cisco MDS 9509 Director, page D-14
Maximum of 1400 W at input of 100 to 120 VAC (1174 W available to modules and fans)
Maximum of 3000 W at input of 200 to 240 VAC (2774 W available to modules and fans)
Maximum of 1325 W at input of 100 to 120 VAC (1150 W available to modules and fans)
Maximum of 2525 W at input of 200 to 240 VAC (2331 W available to modules and fans)
lists the specifications for the Cisco MDS 9509 power supplies.
Specifications for Cisco MDS 9509 Power Supplies

Power Specifications for the Cisco MDS 9509 Director

Specification
Autoranging input with power factor corrector.
100 to 240 VAC (±10%).
Cisco MDS 9500 Series Hardware Installation Guide
Typical AC Power Consumption (Watts)
697
181
127
107
162
230
221
175
D-9