Appendix; Cabinet And Rack Installation; Cabinet And Rack Requirements; General Requirements For Cabinets And Racks - Cisco AJ732A - MDS 9134 Fabric Switch Installation Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .

Cabinet and Rack Installation

This appendix provides information on the cabinet and rack installation and includes the following
sections:
•
•
•

Cabinet and Rack Requirements

This section provides the Cisco MDS 9000 Family requirements for the following types of cabinets and
racks, assuming an external ambient air temperature range of 32 to 104
•
•
•
•
If you are selecting an enclosed cabinet, We recommend one of the thermally validated types: standard
Note
perforated or solid-walled with a fan tray.

General Requirements for Cabinets and Racks

The cabinet or rack must be one of the following types:
•
•
OL-17467-02
Cabinet and Rack Requirements, page C-1
Cisco MDS 9000 Family Telco and EIA Shelf Bracket, page C-6
Cisco MDS 9500 Shelf Bracket, page C-13
Standard perforated cabinets
Solid-walled cabinets with a roof fan tray (bottom to top cooling)
Standard open racks
Two-post telco racks
Standard 19-inch four-post EIA cabinet or rack, with mounting rails that conform to English
universal hole spacing per section 1 of ANSI/EIA-310-D-1992. See the
Perforated Cabinets" section on page C-3
Cabinets" section on page
Standard two-post telco rack, with mounting rails that conform to English universal hole spacing per
section 1 of ANSI/EIA-310-D-1992. See the
on page C-6.
A P P E N D I X
and the "Requirements Specific to Solid-Walled
C-4.
"Requirements Specific to Two-Post Telco Racks" section
Cisco MDS 9500 Series Hardware Installation Guide
C
o o
F (0 to 40 C):
"Requirements Specific to
C-1