Removing And Installing Compactflash Cards; Removing A Compactflash Card - Cisco AJ732A - MDS 9134 Fabric Switch Installation Manual

Chapter 2 Installing the Cisco MDS 9500 Series
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Note

Removing and Installing CompactFlash Cards

The supervisor module has one slot for an optional CompactFlash card. You can use this slot to install
additional flash memory for storing and running software images and configuration files, or to serve as
an I/O device.
Only use CompactFlash devices that are certified for use with Cisco MDS switches and are formatted
Caution
using Cisco MDS switches. Using CompactFlash devices that are uncertified or are formatted using
other platforms may result in errors. For information on formatting the external CompactFlash, see the
Cisco MDS 9000 Family CLI Configuration Guide or the Cisco MDS 9000 Family Fabric Manager
Configuration Guide.
You can install and remove the CompactFlash card with the switch powered on.
Do not remove the CompactFlash card while the access LED light is on or the file may be corrupted.
Caution
This section describes how to install and remove a CompactFlash card. For additional information about
the CompactFlash card, see the Cisco MDS 9000 Family CLI Configuration Guide or the Cisco MDS
9000 Family Fabric Manager Configuration Guide.

Removing a CompactFlash Card

To remove a CompactFlash card, follow these steps:
Verify that no operations are in progress by verifying that the LED is off.
Step 1
Press the ejector button until the card is free of the connector at the back.
Step 2
Remove the card from the slot and place it in an antistatic bag.
Step 3
OL-17467-02
If you purchased this product through a Cisco reseller, contact the reseller directly for technical
support. If you purchased this product directly from Cisco Systems, contact Cisco Technical
Support at this URL: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml.
Removing and Installing CompactFlash Cards
Cisco MDS 9500 Series Hardware Installation Guide
2-75