Cisco Fibre Channel Sfp And Sfp+ Transceivers - Cisco AJ732A - MDS 9134 Fabric Switch Installation Manual

Appendix D Technical Specifications
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Use only Cisco SFP transceivers on the Cisco MDS 9500 Series. Each Cisco SFP transceiver is encoded
with model information that enables the switch to verify that the SFP transceiver meets the requirements
for the switch.
Note Generation 2 modules will not support 1-Gbps/2-Gbps SFPs. Generation 2 modules only support 4-Gbps
SFPs.
This section provides the following topics:
•
•
•
•
•

Cisco Fibre Channel SFP and SFP+ Transceivers

Table D-27
Table D-27
Transceiver Module
Product Number
DS-SFP-FC4G-SW
DS-SFP-FC4G-MR
DS-SFP-FC4G-LW
DS-SFP-FC-2G-SW
DS-SFP-FC-2G-LW
DS-SFP-FC8G-SW
DS-SFP-FC8G-LW
OL-17467-02
Cisco Fibre Channel SFP and SFP+ Transceivers, page D-23
Cisco Fibre Channel and Gigabit Ethernet Transceivers, page D-28
Cisco CWDM SFP Transceivers, page D-30
Cisco Gigabit Ethernet Transceivers, page D-34
Cisco DWDM SFP Transceivers, page D-34
lists the Cisco 2-Gbps and 4-Gbps SFP, and 8-Gbps SFP+ Fibre Channel transceivers.
Cisco 2-Gbps and 4-Gbps SFP , and 8-Gbps SFP+ Fibre Channel Transceivers
Description
1/2/4-Gbps Fibre Channel SW, SFP, LC
1/2/4-Gbps Fibre Channel LW 4-km, SFP, LC
1/2/4-Gbps Fibre Channel LW 10-km, SFP, LC
1/2-Gbps Fibre Channel SW, SFP, LC
1/2-Gbps Fibre Channel LW, SFP, LC
2/4/8-Gbps Fibre Channel SW, SFP+, LC
2/4/8-Gbps Fibre Channel LW, SFP+, LC
SFP and SFP+ Transceiver Specifications
Cisco MDS 9500 Series Hardware Installation Guide
Type
Short wavelength
Long wavelength
Long wavelength
Short wavelength
Long wavelength
Short wavelength
Long wavelength
D-23