Installing The Chassis In A Cabinet Or Rack - Cisco AJ732A - MDS 9134 Fabric Switch Installation Manual

Installing the Chassis in a Cabinet or Rack

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Tip Keep the shipping container for use when moving or shipping the chassis in the future. The shipping
carton can be flattened and stored with the pallet.
If you purchased this product through a Cisco reseller, contact the reseller directly for technical support.
Note
If you purchased this product directly from Cisco Systems, contact Cisco Technical Support at this URL:
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml.
The switch is thoroughly inspected before shipment. If any damage occurred during transportation or
Note
any items are missing, contact your customer service representative immediately.
To inspect the shipment, follow these steps:
Compare the shipment to the equipment list provided by your customer service representative and ensure
Step 1
that you have received all items, including the following:
•
•
•
•
•
•
Check for damage and report any discrepancies or damage to your customer service representative. Keep
Step 2
the following information ready:
•
•
•
•
Installing the Chassis in a Cabinet or Rack
This section describes how to install the Cisco MDS 9500 Series in a cabinet or rack that meets the
requirements described in this document, using the rack-mount kit provided with the switch. A separate
procedure is provided for each type of director:
•
•
•
If the rack is on wheels, ensure that the brakes are engaged or that the rack is otherwise stabilized.
Caution
Cisco MDS 9500 Series Hardware Installation Guide
2-6
Print documentation and CD-ROMs
Grounding lug kit
Rack-mount kit
ESD wrist strap
Cables and connectors
Any optional items ordered
Invoice number of shipper (see packing slip)
Model and serial number of the damaged unit
Description of damage
Effect of damage on the installation
Installing the Cisco MDS 9513 Director in a Rack, page 2-7
Installing the Cisco MDS 9509 Director in a Rack, page 2-11
Installing the Cisco MDS 9506 Director in a Rack, page 2-15
Chapter 2 Installing the Cisco MDS 9500 Series
OL-17467-02