Power Specifications for the Cisco MDS 9513 Director
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Table D-6
Module
Crossbar module fan tray
Module blank panels
Table D-7
module.
Note
The CSM does not support Cisco SAN-OS Release 3.0(1).
Table D-7
Attribute
Nominal voltage
Rated capacity
Discharge
Charge
Storage temperature
Relative humidity range From 5 to 90%
Power Specifications for the Cisco MDS 9513 Director
This section includes the following topics:
•
•
•
Specifications for the Cisco MDS 9513 Power Supplies
The 6000-W AC power supply provides power based upon the input voltage. Each power supply has two
AC power connections and will provide power as follows:
•
•
•
•
Cisco MDS 9500 Series Hardware Installation Guide
D-6
Weight of Modules in the Cisco MDS 9000 Family (continued)
lists the specifications for the batteries on the Cisco MDS 9000 Family caching services
Caching Services Module Battery Specifications
Value
9.6 V
Typical discharge capacity at 0.2C rate: 2100 mAh
Minimum discharge capacity at 0.2C rate: 2000 mAh
Minimum discharge capacity at 5C rate: 1800 mAh
(1 V/cell discharge cut-off)
The battery is capable of continuous discharge from
41 to 140°F (5 to 60°C) at 5C-rate
From 32 to 59°F (0 to 15°C) at C/10 rate and from 59
to 104°F (15 to 40°C) at C/2 rate
32 to 95°F (0 to +35°C)
Specifications for the Cisco MDS 9513 Power Supplies, page D-6
Component Power Requirements and Heat Dissipation for the Cisco MDS 9513 Director, page D-7
AC Power Consumption for the Cisco MDS 9513 Director, page D-8
One AC power connection @110 VAC = No output
Two AC power connection @110 VAC = 2900 W output
One AC power connection @ 220 VAC = 2900 W output
One AC power connection @110 VAC and one AC power connection @ 220 VAC = 2900 W output
Appendix D
Weight
2.25 lb (1.13 kg)
0.50 lb (0.25 kg)
Technical Specifications
OL-17467-02