Cisco AJ732A - MDS 9134 Fabric Switch Installation Manual page 29

Chapter 1 Product Overview
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Cisco MDS 9506 Director
The Cisco MDS 9506 Director has a 6-slot chassis as shown in
•
•
•
•
•
Figure 1-4
1
2
1
2
3
OL-17467-02
Up to two Supervisor-1 modules that provide a switching fabric, with a console port, COM1 port,
and a MGMT 10/100 Ethernet port on each module. Slots 5 and 6 are reserved for the supervisor
modules.
Four slots for optional modules that can include up to four switching modules or three IPS modules.
Two power supplies located in the back of the chassis. The power supplies are redundant by default
and can be configured to be combined if desired.
Two power entry modules (PEMs) in the front of the chassis for easy access to power supply
connectors and switches.
One hot-swappable fan module with redundant fans.
Cisco MDS 9506 Chassis
6
3
Switching or services modules in slots 1–4
Supervisor modules in slots 5 and 6
Fan module
Figure 1-4, and it supports the following:
4
4 ESD Socket
5
Power supplies (in back)
6 Location of power entry modules (PEMs) --
one PEM shown and one filler panel shown.
Cisco MDS 9500 Series Hardware Installation Guide
Chassis
5
1-7