Installing The Spa400; Connecting The Spa400 To The Switch; Configuring The Spa400 Network Connection; Upgrading The Firmware For The Spa400 - Linksys SPA9000-NA Installation And Configuration Manual

4 . To verify the upgrade, complete the following tasks:
a . Press the Setup button on the phone keypad .
b . Scroll down to 10 - Product Info, and then press the Select soft key .
c . Scroll down to 3 - Software Version .
d . Verify that the new firmware version number appears .

Installing the SPA400

The SPA400 is an integrated part of the Linksys Voice System (LVS) . The SPA400 provides connectivity
to the PSTN network and has an integrated voice mail application available on the same platform .
Depending on your voice service configuration (i .e . combination of VoIP, PSTN and ISDN line/services),
you can connect up to four SPA400 devices to your LVS .
SLM224P Ethernet Switch
SPA9000
Analog Phone
NOTE:
This illustration depicts only the devices that are connected at this stage in the installation .
This section includes the following topics:
"Connecting the SPA400 to the Switch" on page 41
•
"Configuring the SPA400 Network Connection" on page 41
•
"Upgrading the Firmware for the SPA400" on page 42
•
Linksys Voice System Installation and Configuration Guide
Connecting the LVS Equipment
IP Phones
Power
Analog Phone Lines

Installing the SPA400

Router Integrated Internet
Access Device
SPA400
Power
40