C.4 Ctc Default Settings - Cisco 15454-DS1-14= - 1.544Mbps Expansion Module Reference Manual

C.4 CTC Default Settings

Table C-22 Time Zones (continued)
Time Zone (GMT +/– Hours)
GMT+10:00
GMT+10:00
GMT+10:00
GMT+10:30
GMT+11:00
GMT+11:00
GMT+11:30
GMT+12:00
GMT+12:00
GMT+12:00
GMT+12:00
GMT+12:45
GMT+13:00
GMT+13:00
GMT+14:00
C.4 CTC Default Settings
Table C-23 on page C-121
the following user-configurable defaults for CTC:
•
•
Note
•
•
Cisco ONS 15454 Reference Manual, R8.5
C-120
Default Value
(GMT+10:00) Canberra, Melbourne, Sydney
(GMT+10:00) Hobart
(GMT+10:00) Khabarovsk, Vladivostok
(GMT+10:30) Lord Howe Island
(GMT+11:00) Honiara, Magadan, Soloman Islands
(GMT+11:00) Noumea - New Caledonia
(GMT+11:30) Kingston - Norfolk Island
(GMT+12:00) Andyra, Kamchatka
(GMT+12:00) Auckland, Wellington
(GMT+12:00) Marshall Islands, Eniwetok
(GMT+12:00) Suva - Fiji
(GMT+12:45) Chatham Island
(GMT+13:00) Nuku'alofa - Tonga
(GMT+13:00) Rawaki, Phoenix Islands
(GMT+14:00) Line Islands, Kiritimati - Kiribati
lists the CTC-level default settings for the Cisco ONS 15454. Cisco provides
Automatic Circuit Routing—Set circuit creation with the Route Automatically check box selected
by default.
Network Circuit Automatic Routing Overridable—Set by default whether or not a user creating
circuits can change (override) the Automatic Circuit Routing setting (also provisionable as a default)
in the CTC Circuit Routing Preferences area. When this default is set to TRUE it enables users to
change whether or not Route Automatically is selected in the check box. When this default is set to
FALSE it ensures that users cannot change the Route Automatically setting while creating circuits
in CTC.
When the Route Automatically check box is not selectable (and is not checked) during circuit
creation, the following automatic routing suboptions are also unavailable: Using Required
Nodes/Spans, Review Route Before Creation, and VT-DS3 Mapped Conversion.
Create TL1-like—Set whether to create only TL1-like circuits; that is, instruct the node to create
only cross-connects, allowing the resulting circuits to be in an upgradable state.
Network Map—Set the default network map (which country's map is displayed in CTC network
view).
Appendix C Network Element Defaults
78-18106-01