Performance Monitoring For Optical Multirate Cards; Oc-12, Oc-48, Oc-192, Oc-192-Xfp Card Pms; Table Of Border Error Rates - Cisco 15454-DS1-14= - 1.544Mbps Expansion Module Reference Manual

Chapter 15 Performance Monitoring
Table 15-25
Section (NE)
CV-S
ES-S
SES-S
SEF-S
If the CV-L(NE and FE) falls in a specific range, then, the user might see discrepancy in the SES and the
Note
UAS-L values. However, ES-L will be in the nearest accuracy. For a few seconds, in a given 10 seconds
interval, the number of CV-L counted may not cross the CV count criteria for SES, (due to
system/application limitation for the below mentioned ranges); as a consequence of which there may not
be 10 continuous SES, thus UAS will not be observed. The corresponding (error) range for the line rates
is as shown in
Table 15-26
Line Rate
OC3
OC12
OC48
OC192

15.8 Performance Monitoring for Optical Multirate Cards

This section lists PM parameters for the optical mutirate cards MRC-12 and MRC-2.5G-4.
Figure 15-22
MRC-12 card and the MRC-2.5G-4 card.
78-18106-01

OC-12, OC-48, OC-192, OC-192-XFP Card PMs

Line (NE)
CV-L
ES-L
SES--L
UASL
FC-L
PSC (1+1, 2F BLSR)
PSD (1+1, 2F BLSR)
PSC-W (4F BLSR)
PSD-W (4F BLSR)
PSC-S (4F BLSR)
PSD-S (4F BLSR)
PSC-R (4F BLSR)
PSD-R (4F BLSR)
Table 15-26.

Table of Border Error Rates

shows where overhead bytes detected on the ASICs produce PM parameters for the
15.8 Performance Monitoring for Optical Multirate Cards
STS Path (NE)
CV-P
ES-P
SES-P
UAS-P
FC-P
PPJC-PDET-P
NPJC-PDET-P
PPJC-PGEN-P
NPJC-PGEN-P
PJCS-PGEN-P
PJCS-PDET-P
PJC-DIFF-P
Error Ranges
154-164
615-625
2459-2470
9835-9845
Cisco ONS 15454 Reference Manual, R8.5
Line (FE)
CV-L
ES-L
SES-L
UAS-L
FC-L
15-51