Table of Contents
Advertisement
Chapter 16
SNMP
16.10.7 Event RMON Group
The Event group controls event generation and notification. It consists of two tables: the eventTable,
which is a read-only list of events to be generated, and the logTable, which is a writable set of data
describing a logged event. The ONS 15454 implements the logTable as specified in RFC 2819.
16.10.7.1 Event Table
The eventTable is read-only and unprovisionable. The table contains one row for rising alarms and
another for falling ones. This table has the following restrictions:
•
•
•
•
16.10.7.2 Log Table
The logTable is implemented exactly as specified in RFC 2819. The logTable is based upon data that is
locally cached in a controller card. If there is a controller card protection switch, the existing logTable
is cleared and a new one is started on the newly active controller card. The table contains as many rows
as provided by the alarm controller.
78-18106-01
The eventType is always log-and-trap (4).
The eventCommunity value is always a zero-length string, indicating that this event causes the trap
to be despatched to all provisioned destinations.
The eventOwner column value is always "monitor."
The eventStatus column value is always valid(1).
16.10.7 Event RMON Group
Cisco ONS 15454 Reference Manual, R8.5
16-23
Advertisement
Table of Contents
