E1000-2 Card; Cross-Connect Compatibility; Figure; Table - Cisco 15454-DS1-14= - 1.544Mbps Expansion Module Reference Manual

5.3.4 Cross-Connect Compatibility

Table 5-6

LED State
Yellow (Active)
Solid Green (Link)
5.3.4 Cross-Connect Compatibility
The E100T-G card is compatible with the XCVT, XC10G and XC-VXC-10G cards.

5.4 E1000-2 Card

Note For hardware specifications, see the
The ONS 15454 uses E1000-2 cards for Gigabit Ethernet (1000 Mbps). The E1000-2 card provides two
IEEE-compliant, 1000-Mbps ports for high-capacity customer LAN interconnections. Each port
supports full-duplex operation.
The E1000-2 card uses GBIC modular receptacles for the optical interfaces. For details, see the
"5.14 Ethernet Card GBICs and SFPs" section on page
Figure 5-3 shows the card faceplate and a block diagram of the card.
Cisco ONS 15454 Reference Manual, R8.5
5-8

E100T-G Port-Level Indicators

Description
Port is active (transmitting or receiving data). By default, indicates the
transmitter is active but can be software controlled to indicate link status,
duplex status, or receiver active.
Link is established. By default, indicates the link for this port is up, but can
be software controlled to indicate duplex status, operating speed, or
collision.
"A.7.3 E1000-2 Card Specifications" section on page
Chapter 5
5-33.
Ethernet Cards
A-49.
78-18106-01