Ethernet Cables; Ubic-H Ds-3/Ec-1 Cable Schematic Diagram - Cisco 15454-DS1-14= - 1.544Mbps Expansion Module Reference Manual

Chapter 1 Shelf and Backplane Hardware
Figure 1-28
Pin 1
Pin 5
Pin 42
Pin 46

1.10 Ethernet Cables

Ethernet cables use RJ-45 connectors, and are straight-through or crossover, depending on what is
connected to them.
Table 1-22
15454.
78-18106-01

UBIC-H DS-3/EC-1 Cable Schematic Diagram

DS-3/EC1 Cable
DS-3 75Ω
Port #1
75Ω Signal
To/From UBIC
DS-3 75Ω
Port #2
75Ω Signal To/From
DS-3 75Ω
Port #11
75Ω Signal To/From
DS-3 75Ω
Port #12
75Ω Signal To/From
75Ω DS-3/EC1 signal coming to/from Tyco SCSI
connector and being placed on 735A (or 735C) Coax
shows 100Base-TX connector pin assignments, used with E100 Ethernet cards in the ONS
Port #1
Port #2
FGND
From/To
Customer DSx
Port #11
FGND
Port #12
Cisco ONS 15454 Reference Manual, R8.5
1.10 Ethernet Cables
1-51