5.2.4 Cross-Connect Compatibility
5.2.4 Cross-Connect Compatibility
The E100T-12 card is compatible with the XCVT card. Do not use the E100T-12 card with the XC10G
and XC-VXC-10G cards.
5.3 E100T-G Card
For hardware specifications, see the
Note
The ONS 15454 uses E100T-G cards for Ethernet (10 Mbps) and Fast Ethernet (100 Mbps). Each card
provides 12 switched, IEEE 802.3-compliant, 10/100BaseT Ethernet ports that can independently detect
the speed of an attached device (autosense) and automatically connect at the appropriate speed. The ports
autoconfigure to operate at either half or full duplex and determine whether to enable or disable flow
control. You can also configure Ethernet ports manually.
diagram of the card.
Figure 5-2
E100T-G
FAIL
ACT
SF
Cisco ONS 15454 Reference Manual, R8.5
5-6
"A.7.2 E100T-G Card Specifications" section on page
E100T-G Faceplate and Block Diagram
Ethernet
10/100
MACs/switch
PHYS
Buffer
memory
Figure 5-2
shows the faceplate and a block
Flash
DRAM
CPU
A/D Mux
FPGA
BTC
Control
memory
Chapter 5
Ethernet Cards
A-49.
B
a
c
k
p
l
a
n
e
78-18106-01