Ds3I-N-12 Card Performance Monitoring Parameters; Figure; Monitored Signal Types For The Ds3I-N-12 Cards; Table - Cisco 15454-DS1-14= - 1.544Mbps Expansion Module Reference Manual

Chapter 15 Performance Monitoring

Table 15-8

Line (NE)
CV-L
ES-L
SES-L
LOSS-L
1. The C-bit PMs (PMs that contain the text "CP-P") are applicable only if the line format is C-bit.
2. DS3(N)-12E cards support SAS-P only on the receive (Rx) path.
3. The SASCP parameter is also displayed as "undefined" for near-end parameter though it is a far-end parameter.

15.5.6 DS3i-N-12 Card Performance Monitoring Parameters

Figure 15-12

Figure 15-12
PTE
Note The XX in
Figure 15-13
DS3i-N-12 cards.
78-18106-01

DS3-12E and DS3N-12E Card PMs

Path (NE)
AISS-P
CV-P
ES-P
2
SAS-P
SES-P
UAS-P
CVCP-P
ESCP-P
3
SASCP-P
SESCP-P
UASCP-P
shows the signal types that support near-end and far-end PMs.

Monitored Signal Types for the DS3i-N-12 Cards

ONS 15454
DS3 Signal
DS3i-N-12 OC-N
DS3i Path (DS3 XX) PMs Near and Far End Supported
STS Path (STS XX-P) PMs Near and Far End Supported
Figure 15-12 represents all PMs listed in
shows where overhead bytes detected on the ASICs produce PM parameters for the
15.5.6 DS3i-N-12 Card Performance Monitoring Parameters
STS Path (NE) Path (FE)
CV-P CVCP-PFE
ES-P ESCP-PFE
SES-P SASCP-P
UAS-P SESCP-PFE
FC-P UASCP-PFE
ONS 15454
Fiber
OC-N
Table 15-9 with the given prefix and/or suffix.
Cisco ONS 15454 Reference Manual, R8.5
1
STS Path (FE)
CV-PFE
ES-PFE
SES-PFE
UAS-PFE
FC-PFE
PTE
DS3 Signal
DS3i-N-12
15-21