Monitored Signal Types For The Oc-3 Cards; Pm Read Points On The Oc-3 Cards - Cisco 15454-DS1-14= - 1.544Mbps Expansion Module Reference Manual

Chapter 15 Performance Monitoring
Figure 15-20
PTE
Note The XX in
given prefix and/or suffix.
Figure 15-21
IR 4 SH 1310 and OC3 IR SH 1310-8 cards.
Figure 15-21
ONS 15454
CV-S
ES-S
SES-S
SEFS-S
CV-L
ES-L
SES-L
UAS-L
FC-L
PPJC-Pdet
NPJC-Pdet
PPJC-Pgen
NPJC-Pgen
PMs read on PMC
Note For PM locations relating to protection switch counts, see the Telcordia GR-253-CORE document.
Table 15-23
78-18106-01

Monitored Signal Types for the OC-3 Cards

ONS 15454
OC-3 Signal
OC-3 OC48
STS Path (STS XX-P) PMs Near and Far End Supported
Figure 15-20 represents all PMs listed in
shows where overhead bytes detected on the ASICs produce PM parameters for the OC3

PM Read Points on the OC-3 Cards

OC-3 Card
Pointer Processors
and Table 15-24 list the PM parameters for OC-3 cards.
15.7 Performance Monitoring for Optical Cards
ONS 15454
Fiber
OC48
Table 15-23, Table
BTC
ASIC
STS CV-P
STS ES-P
STS FC-P
STS SES-P
Path
STS UAS-P
Level
STS CV-PFE
STS ES-PFE
STS FC-PFE
STS SES-PFE
STS UAS-PFE
PMs read on BTC ASIC
Cisco ONS 15454 Reference Manual, R8.5
PTE
OC-3 Signal
OC-3
15-24, and Table 15-25 with the
XC Card(s) OC-N
15-49