Table of Contents
Advertisement
Appendix C
Network Element Defaults
•
•
•
•
Note
Any node level defaults changed using the Provisioning > Defaults tab, changes existing node level
provisioning. Although this is service affecting, it depends on the type of defaults changed, for example,
general, and all timing and security attributes. The "Changing default values for some node level
attributes overrides the current provisioning." message is displayed. The Side Effects column of the
Defaults editor (right-click a column header and select Show Column > Side Effects) explains the effect
of changing the default values. However, when the card level defaults are changed using the
Provisioning > Defaults tab, existing card provisioning remains unaffected.
Note
For more information about each individual node setting, refer to the "Change Node Settings" chapter
of the Cisco ONS 15454 Procedure Guide.
Table C-21
Node Default Settings
Default Name
NODE.circuits.SendPDIP
NODE.circuits.State
NODE.circuits.pathprotection.AllowpathprotectionOverOnePlusOne
NODE.circuits.pathprotection.ProvisionWorkingGoAndReturnOnPrimaryPath
NODE.circuits.pathprotection.ReversionTime
NODE.circuits.pathprotection.Revertive
NODE.circuits.pathprotection.STS_SDBER
NODE.circuits.pathprotection.STS_SFBER
78-18106-01
Security Policy settings—Set the allowable failed logins before lockout, idle user timeout for each
user level, optional lockout duration or manual unlock enabled, password reuse and change
frequency policies, number of characters difference that is required between the old and new
password, password aging by security level, enforced single concurrent session per user, and option
to disable inactive user after a set inactivity period.
Security Password settings—Set when passwords can be changed, how many characters they must
differ by, whether or not password reuse is allowed, and whether a password change is required on
first login to a new account; set password aging enforcement and user-level specific aging and
warning periods; set how many consecutive identical characters are allowed in a password,
maximum password length, minimum password length, minimum number and combination of
nonalphabetical characters required, and whether or not to allow a password that is a reversal of the
login ID associated with the password.
BITS Timing settings—Set the AIS threshold, Admin synchronization status messaging (SSM),
coding, facility type, framing, state, and line build-out (LBO) settings for building integrated timing
supply 1 (BITS-1) and BITS2 timing.
General Timing settings—Set the mode (External, Line, or Mixed), quality of reserved (RES) timing
(the rule that defines the order of clock quality from lowest to highest), revertive, reversion time,
and SSM message set for node timing.
C.3 Node Default Settings
Default Value Default Domain
TRUE
IS,AINS
FALSE
TRUE
5.0 (minutes) 0.5, 1.0, 1.5 ..
FALSE
1.00E-06
1.00E-04
Cisco ONS 15454 Reference Manual, R8.5
TRUE, FALSE
IS, OOS,DSBLD,
OOS,MT,
IS,AINS
TRUE, FALSE
TRUE, FALSE
12.0
TRUE, FALSE
1E-5, 1E-6, 1E-7,
1E-8, 1E-9
1E-3, 1E-4, 1E-5
C-101
Advertisement
Table of Contents
