A.8 Storage Access Networking Card Specifications - Cisco 15454-DS1-14= - 1.544Mbps Expansion Module Reference Manual

Appendix A Hardware Specifications
•

A.8 Storage Access Networking Card Specifications

This section describes the FC_MR-4 (Fibre Channel) card specifications.
For compliance information, refer to the Cisco Optical Transport Products Safety and Compliance
Information document.
•
•
•
•
•
•
78-18106-01
– Operating humidity: 5 to 95 percent, noncondensing
Power consumption: 100 W
–
Dimensions
Height: 12.650 in. (321.3 mm)
–
Width: 0.716 in. (18.2 mm)
–
Depth: 9.000 in. (228.6 mm)
–
Depth with backplane connector: 9.250 in. (235 mm)
–
– Weight not including clam shell: 0.9 kg (2.1 lb)
Fibre Channel Support: FC-0 and FC-1 layers of ANSI X3.230 FC-PH
GBIC Line Interface
Bit Rate: 1.0625 Gbit/s single-rate or 1.0625/2.125 dual-rate Gbit/s Fibre Channel (FC)
–
– Wavelength/Fiber/Reach:
850 nm, multimode fiber, 550 m (SX)
1310 nm, single-mode fiber, 10 km (LX)
1550 nm/, single-mode fiber, 80 km (ZX)
Hot pluggable
–
Auto-detection
–
Transmitter
– Maximum transmitter output power: depends on GBIC type (see
– Minimum transmitter output power: depends on GBIC type (see
Receiver
– Maximum receiver level: depends on GBIC type (see
– Minimum receiver level: depends on GBIC type (see
Environmental
Operating temperature
–
C-Temp (15454-E100T): 23 to 131 degrees Fahrenheit (–5 to +55 degrees Celsius)
Operating humidity: 5 to 95 percent, noncondensing
–
Power consumption: 60 W, 1.35 A, 221.93 BTU/hr
–
Dimensions
Height: 12.650 in. (321.3 mm)
–
Width: 0.716 in. (18.2 mm)
–
– Depth: 9.000 in. (228.6 mm)
A.8 Storage Access Networking Card Specifications
Table A-2)
Table A-2)
Table A-2)
Table A-2)
Cisco ONS 15454 Reference Manual, R8.5
A-53