Cisco 15454-DS1-14= - 1.544Mbps Expansion Module Reference Manual page 670

B.3.2 Port and Cross-Connect Service State Transitions
Table B-5
Current Service State
OOS-AU,FLT & OOG
OOS-AUMA,FLT &
LPBK & MT
OOS-AUMA,FLT &
LPBK & MT & OOG
OOS-AUMA,FLT & MT Alarm/condition is cleared.
Cisco ONS 15454 Reference Manual, R8.5
B-8
ONS 15454 Port and Cross-Connect Service State Transitions (continued)
Action
Alarm/condition is cleared.
Put the VCAT cross-connect in the
IS,AINS administrative state.
Put the VCAT cross-connect in the
OOS,DSBLD administrative state.
Put the VCAT cross-connect in the
OOS,MT administrative state.
Release the loopback.
Alarm/condition is cleared.
Release the loopback.
Alarm/condition is cleared.
Put the port or cross-connect in the IS
administrative state.
Put the port or cross-connect in the
IS,AINS administrative state.
Put the port or cross-connect in the
OOS,DSBLD administrative state.
Put the port or cross-connect in a
loopback.
Put the VCAT cross-connect in the
OOS,OOG administrative state.
Appendix B Administrative and Service States
Next Service State
IS-NR or OOS-MA,MT
If an In Group member is
•
IS-NR or OOS-AU,AINS,
the member transitions to
IS-NR.
• If an In Group member is
OOS-MA,MT, the member
transitions to OOS-MA,MT
OOS-AU,AINS & FLT & OOG
OOS-MA,DSBLD & OOG
OOS-AUMA,FLT & MT & OOG
OOS-AUMA,FLT & MT
OOS-MA,LPBK & MT
OOS-AUMA,FLT & MT & OOG
OOS-MT,MT & OOG
OOS-MA,MT
OOS-AU,FLT
OOS-AU,AINS & FLT
OOS-MA,DSBLD
OOS-MA,DSBLD & OOG for a
VCAT cross-connect
OOS-AUMA,FLT & LPBK &
MT
OOS-AUMA,FLT & MT & OOG
78-18106-01