Starting And Shutting Down The Nvr; Starting The Nvr; Shutting Down The Nvr; Figure 15 Devices Connection (Hn35160200N) - Honeywell 35 Series User Manual

Figure 15 Devices Connection (HN35160200N)

Starting and Shutting Down the NVR

Starting the NVR

1. Make sure that the NVR is connected to an appropriate power source.
2. Turn on the power switch on the rear panel to start the NVR.
Note: The beep at startup is normal.

Shutting Down the NVR

To shut down the NVR, you must be logged in as the admin user or have
Note:
shutdown privileges assigned to you.
Honeywell 35 Series Network Video Recorder User Guide
17