Abnormal Events; Figure 70 Camera Alarm In Port; Figure 71 Abnormal Events - Honeywell 35 Series User Manual

Figure 70 Camera Alarm in Port

2. Select the Channel/Alarm in/Normal state.
3. Enable to open camera alarm in port. The following operations are
same as
4. Click APPLY.

Abnormal Events

1. Go to Main Menu > Event > Abnormal events.
The Abnormal events interface is displayed.

Figure 71 Abnormal events

2. Configure parameters.
58
Alarm In Settings.
Honeywell 35 Series Network Video Recorder User Guide