Figure 78 Poe; Table 24 Port Parameters - Honeywell 35 Series User Manual

Table 24 Port Parameters

Parameter
HTTP Port
HTTPS Port
RTSP Port
Control port
3. Click APPLY to complete the settings.
POE
This function is only applicable for PoE NVR.
1. Go to Main Menu > Networks > Networks > POE.

Figure 78 POE

2. The default Auto manage for PoE camera is open. Users can set the
PoE camera IP parameters manually.
3. Click APPLY to complete the settings.
Note: When the camera via POE, and the auto manage for POE camera is
enabling, icon
The PoE parameters are modified and the device will reboot.
64
Description
The default value setting is 80. You can enter the value according to your
actual situation.
If you enter other value, for example 70, you should enter 70 after the IP
address when logging in the Device by browser.
HTTPS communication port. The default value setting is 443. You can
enter the value according to your actual situation.
The default value setting is 554. You can enter the value according to
your actual situation.
The default value setting is 30413. You can enter the value according to
your actual situation.
can be shown in channel list.
Honeywell 35 Series Network Video Recorder User Guide