Network Traffic - Honeywell 35 Series User Manual

Parameter
Trap port
Trap community
SNMPV3
Read security name
Write security name
Security level
Auth algorithm
Auth password
Encry algorithm
Encry password
3. Compile the two MIB files by MIB Builder.
4. Run MG-SOFT MIB Browser to load in the module from compilation.
5. On the MG-SOFT MIB Browser, enter the Device IP that you want to
manage, and then select the version number to query.
6. On the MG-SOFT MIB Browser, unfold the tree-structured directory
to obtain the configurations of the Device, such as the channels
quantity and software version.

Network Traffic

At the Network Traffic interface, you can view the send rate and receive
rate. The status of LAN(S) are shown in list.
Go to Main Menu > Networks > Network Traffic. The Network Traffic
interface is displayed.
74
Description
The write community only can read data.
IP address of the trap.
Management port of accepting message from trap.
community string of trap.
The trap community string allows the manager to receive
asynchronous information from the agent.
Version of SNMP.
SNMPv3 uses community strings, but allows for secure
authentication and communication between SNMP manager and
agent.
Name of read security.
Name of write security.
Security Level between SNMP manager and agent, includes three
levels:
Honeywell 35 Series Network Video Recorder User Guide