Figure 61 Smart Motion - Honeywell 35 Series User Manual

Smart Motion
For some cameras can detect person or car, you can set the smart motion
parameter in NVR that manage convenient the cameras.
Go to Main Menu > Event > Motion Detection > Smart Motion, the Smart
Motion interface is displayed.

Figure 61 Smart Motion

To configure the linkage event actions of smart motion's, see
Motion Detection Parameters
Setting Smart Motion Area
Move the cursor to the drawing interface and click to generate a point.
Move the cursor to draw a line, and then click to generate another point.
This is how a line is generated. In this way, continue to draw lines to form
any shape, and right-click to finish line drawing.
Click REMOVRE ALL to remove detection area.
Honeywell 35 Series Network Video Recorder User Guide
Table 17
51