Figure 39 Operating online channel
•
•
•
•
Protocol Management
If the user wants to add the different protocol cameras to NVR, you can set
the protocol management, and add cameras one by one.
1. Go to Main Menu > Camera > Camera > Protocol Management. The
Protocol Management interface is displayed.
Figure 40 Protocol Management
2. Choose the custom protocol from the drop-down list.
3. Input the protocol name.
4. Select main stream and sub stream. The main stream shows image
on full screen live video. The sub stream shows image on split screen.
If you only select main stream, the channel will not show image on
split screen.
34
Click Update to update the camera information.
Click Reboot. In the pop-up window "Are you sure reboot", click OK to
reboot the camera.
Click Reset. Enable or disable Reserve IP address. Click OK to
reboot the camera.
Click Modify IP. Enter the IP address and Subnet mask Click OK.
Honeywell 35 Series Network Video Recorder User Guide