Camera Tampering; Video Loss; Figure 64 Camera Tamper - Honeywell 35 Series User Manual

Camera Tampering

When the camera lens is covered, or the video is displayed in a single color
because of sunlight status, the monitoring cannot be continued normally.
To avoid such situations, you can configure the tamper alarm settings.
1. Go to Main Menu > Event > Camera Tamper.

Figure 64 Camera Tamper

2. To configure the settings for the tampering detection parameters,
Note: The Tampering function does not have detection area and sensitivity
items.
3. Click APPLY to complete the settings.

Video Loss

When the video loss occurs, the system activates the alarm.
1. Go to Main Menu > Event > Video Loss.
Honeywell 35 Series Network Video Recorder User Guide
The Camera Tamper interface is displayed.
refer to Motion Detection.
Click COPY, in the Copy to dialog box, select the additional
channel(s) that you want to copy the motion detection settings to,
and then click OK.
The Video Loss interface is displayed.
53