Figure 79 Ipv4Cctv - Honeywell 35 Series User Manual

IPv4CCTV
This function is used for No PoE NVR that has two LANs. The IPv4CCTV is
for LAN2. LAN2 is only for adding cameras, cannot access the external
network.
Note: This function is supported on select models.
1. Go to Main Menu > Networks > Networks > IPv4CCTV.

Figure 79 IPv4CCTV

2. Set the LAN2's IP address parameters.
Note: LAN1 and LAN2 cannot be set the same network segment.
You can add the cameras through LAN2 access to local network, but
you must plug LAN1 in Internet to remote access.
3. Click APPLY to complete the settings.
802.1X
The 802.1x protocol is an access control and authentication protocol
based on Client/Server. It can restrict unauthorized users/devices from
accessing LAN/WLAN through the access port. User can access the NVR
through 802.1X account.
1. Go to Main Menu > Networks > 802.1X.
Honeywell 35 Series Network Video Recorder User Guide
The 802.1X interface is displayed.
65