Figure 35 Add Camera - Honeywell 35 Series User Manual

Figure 35 Add Camera

2. Add cameras.
a. Click START SEARCH.
b. Click ADD DEVICES to register cameras on the online device list
Note: The number of adding cameras should meet the captivity of NVR.
When the cameras exceed the captivity, the channels will not be added.
The 30/60 series IP cameras cannot be connected to PoE port directly,
you should set the password at IP cameras' web interface, and the
password should be same as channel password of NVR.
Once the PoE cameras are added, they cannot be deleted manually at
NVR UI interface. You can unplug the PoE network cables to delete.
c. Select the cameras and then click Add to add to Channel list.
Manually Add Devices
a. On the Channel list, click
30
The devices found are displayed at the upper pane. Devices
already added do not show in the searched results.
directly.
The Manually Add Devices interface is displayed.
Honeywell 35 Series Network Video Recorder User Guide
.