Email; Figure 83 Nat Port Interface - Honeywell 35 Series User Manual

NAT Port
NAT port (network address translation) user can through NAT port to
access the channels of NVR. User can set the start port, and it will generate
the end port automatically. We will view the NAT port when we access the
channel through clicking
1. Go to Main Menu > Networks > Port Mapping > NAT Port.
The NAT Port interface is displayed.

Figure 83 NAT Port Interface

2. Enable the function to set port.
3. Click APPLY to complete the settings

Email

If the simple mail transfer protocol (SMTP) function is enabling, the device
automatically sends alarm information to specified email addresses when
an alarm is generated. User can use two mailboxes to send information.
You can configure the email settings to enable the system to send the
email as a notification when there is an alarm event occurs.
1. Go to Main Menu > Networks > Email.
The Email interface is displayed.
68
Honeywell 35 Series Network Video Recorder User Guide
icon at Web interface.