Alarm In; Figure 68 Crowd Detection - Honeywell 35 Series User Manual

Motion
The multi loitering function does not have detection area and
sensitivity items. The detection area is configured in cameras
interface, so the parameters can be copied.
3. Click APPLY to complete the settings.
Crowd Detection
When channel camera is counting personnel in the setting area, it will
trigger the intelligent analysis personnel count alarm of NVR
1. Go to Main Menu > Event > Intelligent Analysis > Crowd Detection.
The Crowd Detection interface is displayed.

Figure 68 Crowd Detection

2. To configure the settings for the Crowd Detection parameters, see
Motion
The Crowd Detection function does not have detection area and
sensitivity items. The detection area is configured in cameras
interface, so the parameters can be copied.
3. Click APPLY to complete the settings.

Alarm In

Alarm In Settings
After connecting the alarm device to the NVR alarm input port, system can
trigger the corresponding alarm operations when there is alarm signal
from the alarm input port to the NVR.
1. Go to Main menu > Event > Alarm In.
56
Detection.
Detection.
Honeywell 35 Series Network Video Recorder User Guide