Figure 37 Update Interface - Honeywell 35 Series User Manual

Parameter
Enable SSL
Note: Choose the protocol from the drop-down list, the protocol is set at
protocol management interface. The cameras should be confirmed to
the protocols.
c. Click OK.
You can click
delete remote device.
You can also add cameras on the live view interface by clicking
the channel window.
UI local Update
You can upgrade the connected network camera firmware.
1. Plug in USB disk with the camera firmware.
2. Go to Main Menu > Camera > Camera. When the camera is online,
click

Figure 37 Update Interface

3. Update the firmware of the connected cameras.
a. Select update file on the pop-up interface.
32
Description
If the remote device is added through Onvif protocol, selecting
the SSL check box will provide encryption protection to the datatr
ansmitted.
To use this function, the HTTPS function should be enabled for
the remote IP camera.
The remote device information is displayed on the Added Device
list.
to change the remote device information. Click
.
Honeywell 35 Series Network Video Recorder User Guide
to
on