Figure 2 Rear Panel (Hn350401Xx); Table 3 Nvr Rear Panel Description (Hn350401Xx) - Honeywell 35 Series User Manual

No.
3

Figure 2 Rear Panel (HN350401xx)

11

Table 3 NVR Rear Panel Description (HN350401xx)

No.
1
2
3
4
5
6
7
8
4
Name
HDD
Name
PoE port
Network port
AUDIO OUT
VGA
HDMI
USB port
ALARM I/O
Power switch
Honeywell 35 Series Network Video Recorder User Guide
Description
The green light is flash when the device is
recording, if the disk is not working, light is always
bright. The light is off without disk.
Description
Built-in switch. Support PoE function.
For PoE series product, you can use this port to provide
power to the network camera.
10M/100Mbps self-adaptive Ethernet port. Connect to
the network cable.
Audio output port. It is to output the analog audio signal
to the devices such as the sound box.
•
Bidirectional talk output.
•
Audio output on 1-window video monitor.
Audio output on 1-window video playback.
VGA video output port. Output analog video signal. It can
connect to the monitor to view analog video.
High definition audio and video signal output port. It
transmits uncompressed high definition video and
multiple-channel data to the HDMI port of the display
device. HDMI version is 1.4.
USB port. Connect to mouse, USB storage device and etc.
They receive signals from external alarm source. C is COM
port. There is one channel of alarm in; there are four
channels of alarm out.
•
When your alarm input device is using external
power, make sure the device and the NVR have the
same GND.
Power on/off button.